Many times an automotive circuit breaker is installed as a single part. In this case, OptiFuse automotive circuit breakers ares available with a mounting bracket welded on the circuit breaker itself.
There are other times when multiple automotive circuit breakers are to be used. In this case, OptiFuse has provided a simple solution to the problem by providing a rail in which to gang the circuit breakers.
The circuit breaker rails are available in even sizes (2, 4, 6, 8, 10, 12) from 2 to 12 positions. The CBS-XXP is the compact version of rail with two mounting slots on each end (-XX is the number of positions of the rail).
The CBS- XX has flange mounting that enables users to pre-wire the circuit breaker assembly and then mount the entire assembly as one unit.
Both rail types are made of coated steel for durability.
Remember also, that since the Type III circuit breakers (MRCB) have a manual reset button on the side, they will not work properly when installed on a rail.
Thank you once again for your continued support of OptiFuse as we try to make life a bit simpler...